full length | 2.08m | Number of joints | 2 |
---|---|---|---|
Standard own weight | 54g | power | Ultra light |
Lure range | 0.1-6g | Line range | PE0.1-0.4 (MF1-2.5lb) |
Updated the famous Limber Tip , a salty sensation solid tip model that combines a mild feel that makes the whole body smooth, and sharp sensitivity and operability .
By reviewing the material and composition of the blanks and the guide grip setting, the tension of the belly bat is slightly increased and at the same time the weight is reduced by about 6 g, so that the sensitivity and operation can be maintained while maintaining the mild usability. Superior Limbertip SS (= Sharp Sense) with even sharper sexuality.
Supports a wide range of rigs from 0.1 to 6g, such as jig head rigs, split shot rigs, lightweight float rigs, and small plugs. In addition, with a 6’10 inch middle length, it is a light class versatile solid tip model that can be used not only in the harbor area but also in rocky shores and small surf.
Details / features
-
- ■ Blank
- Equipped with a highly elastic short solid tip with a tip diameter of 0.7 mm that combines “tension sensitivity” and “echo sensitivity” in a high dimension.
Berry is mainly composed of 33 tons of carbon, which is made by applying “Nanoalloy ® technology” to the high-strength and high elastic modulus carbon fiber “Treca ® T1100G”, and achieves both exquisite tension and strength in an ultra-lightweight structure.
The bat is mainly made of 40 ton carbon, which has a higher elastic modulus, but by winding it up a little slenderly, it has both the strength of tension that does not make you feel dull, and the mildness that makes it smooth in conjunction with the berries.
Then, the lightest 4-axis cloth, Super Light Quattro Cloth, is reinforced from the grip end to the bat. Minimize weight increase, increase rigidity, and pursue further lift potential.
In order to maximize the sensitivity of the blanks, the decorative winding on the winding check part has been eliminated, and everything except the bat logo part has an unpainted unsanded finish.
-
- ■ Guide system
- Compared to SiC ring guides of the same size, the inner diameter is wider due to the thinness of the ring, and the titanium frame torzite ring guide, which has improved line slippage due to the characteristics of the ring surface, is actively adopted to increase the flight distance. One class guide size down than before without sacrificing.
Titanium frame SiC ring LF guide (T-LFST3), which makes it difficult for the line to have a sharp angle because the ring cross-sectional shape is gentle on the top guide, which makes it easy for the line to have an angle. T-KTTG 3, 3, 3, 3.5, 4.5, 7), the original guide is a titanium frame torzite ring AT guide (T-ATTG12).
In addition, the amount of winding and coating of each guide thread is suppressed as much as possible, and the top guide is a thorough ultra-lightweight and ultra-sensitive setting in which the thread is not wound and only the step is removed.
-
- ■ Joint
- We are particular about smooth bend curve and weight reduction, and adopt put over joint set to the minimum necessary length.
-
- ■ Grip design
- Ultra-lightweight foregrip with quattro cross carbon sleeve only.
-
- Fuji IPS reel seat + ultra-compact EVA center grip that has excellent sensitivity transmission due to the size of the contact surface with the sensitive palm base, keeps concentration without feeling foreign matter, and can be firmly grasped when fighting.
The EVA end grip is designed to be the minimum and lightest, leaving only the starting point required for casting in order to eliminate blurring during rig operation caused by heavy objects at the end. Both the center and end are carefully set with the EVA size optimized according to the application.
- Fuji IPS reel seat + ultra-compact EVA center grip that has excellent sensitivity transmission due to the size of the contact surface with the sensitive palm base, keeps concentration without feeling foreign matter, and can be firmly grasped when fighting.
-
- An ultra-lightweight Superior original end plate is attached to the grip end.
-
- ■ Grip length
-
- ■ Grip internal structure
- By adopting a joint structure inside the grip, we pursued further lift potential by increasing rigidity while minimizing weight increase.
-
- ■ Made in Japan
- This product is made in Japan. Please see here (Grand Cobra Product Development Concept) for
“Commitment to Made in Japan” .
* The image is “SPRS-70L-T”.
-
- ■ “National Fishing Rod Fair Trade Council” certified product
- Proof that the “National Fishing Rod Fair Trade Council” has been certified as conforming to the contents and conditions based on the provisions of the “ Fair Competition Code for Labeling of Fishing Rods” certified by the Fair Trade Commission and the Commissioner of the Consumer Affairs Agency. “Fishing rod fair mark” is affixed.
Bewertungen
Es gibt noch keine Bewertungen.