NEW SLIDE SWIMMER 175 F #24

The „new slide swimmer 175“, which will be shipped after June 2021, will switch to a new soft shell equipped with trouble-free bumper fins inherited from the 250.
This new soft shell creates a stable action that keeps the balance even during fast retrieve, and also plays a role in further enhancing the sharpness of the dirt.

It also greatly reduces hook entanglement on the body and line, which is likely to occur when casting or landing. It brings a big advantage in big bait games where miscasting is fatal.

*Images such as color variations are not images of the NEW soft shell.

The ABS hollow core body that shows a sharper and sharper dirt action makes it possible to set a clear color and install a spring weight micro-vibe system.
The weight is installed outside the front core body, and you can easily tune the weight by removing the soft shell.

The spring weight system installed in the head part creates a lively micro-vibration when the weight is shaken, and when jerking, the knock sound that hits the inner wall induces a bite.

The silent type „floating model“ with the spring weight system omitted can invite a bite with a irritating action that makes you aware of the surface of the water.
Also, if you remove the front soft shell and add weight, you can tune it to a silent sinking type, greatly expanding the range of strategies.

The insert plate built into the ABS core body is a model that appeals with a vivid reflection that shines dullly through the shell.
Although the spring weight system is not installed, the front body is equipped with a Φ7mm steel rattle ball.

The damper effect of the soft shell, which protrudes from the front core body, not only suppresses the noise generated by the joints colliding, but also creates a lively vibration with the secondary action of pushing back the rear body with elasticity.

The duct installed between the core body and the soft shell takes in the water flow inside the body during retrieve and discharges it at the joint. A soft shell with a slight bend creates a unique sense of life.

The hooks selected with a strong awareness of the monster class are not only strong, but also boast outstanding penetrating power with an extremely smooth surface treatment.
In addition, the tin (tin) coat finish, which is similar to the protective color of the belly of a baitfish, camouflages the presence of the hook.

HOOK: 175#1, 145#3
SPLIT RING: 175#4, 145#3

The meandering action that swims lusciously and fluttering realistically reproduces defenseless swimming baitfish and weakened and dying baitfish, stimulating eating habits and aggression and inducing bites. A wide range of capture is possible depending on the holding angle and retrieve speed of the rod.

The high response unique to the lipless model that responds quickly to rod operation, and the irregular behavior such as invading the territory and running away in a hurry gives a „pause“ that induces a bite at the right point. , boasts a high strike rate.

When placed in direct sunlight, in a car, or in a high-temperature location such as a tackle box while fishing, the expansion of the air chamber due to the difference in outside temperature may cause deformation, cracks, or other damage.
Especially in the summer, when the temperature rises, you need to be careful, so please be careful when storing the plug. Please note that we cannot guarantee any damage due to neglect.

・Please keep it in the case so that it does not become peculiar.
・ Do not store with other hard lures or soft lures as it may cause deformation, discoloration, melting, etc.
・ After use, please store after drying.
・ A drain hole for draining water is set in the tail part. After use, drain the water accumulated inside before storing.