deps B CUSTOM 3/8oz DW #06 Crokin

When hooking up, the line form of the line eye to the hook point is in a straight line to transmit the hooking power without loss, and it reliably catches the upper jaw of the decabas even at long distances. In addition, by adopting a trailer hold wire that eliminates the head-integrated worm keeper, the rigidity inherent to the narrow bent custom spinner bait hook creates an appropriate amount of deflection, reducing the load on the arm.
φ1.0mm, the elasticity of SUS-301 Hercule wire and the rigidity balance created by the flex of the hook absorbs the bite that you play, and pursues the ideal shape that also prevents variation.

The front face for maximum water flow resistance and the side lines that have been narrowed down sharpen the vertical shaking, and bring about an irregular reaction due to rolling and front heavy center of gravity that avoids changes in water flow.
Although it has a slightly milder characteristic than the initial type (1997-99), the original vertical swing head that selected the most catchable shape according to weight from a steady actual fishing test boasts a high performance that can not be imitated only by concept copy I will.

In the water area affected by the lake current and in the water area in which complicated water streams are intertwined, it shows a flapping to the left and right that avoids changes in the water stream and an irregular reaction due to roll action.
A good track record in Nagarekawa proves that the action only B custom has is more baitfish-like.

The head that receives the water flow at the front face is pushed up by the resistance, but due to the springback characteristic of the arm, it is projected again forward.
The continuous action and the combined action by vibrating the blade produce the unique pitching motion of B custom and the stirring of the water flow.

A trailer hold wire that prevents the worm from tearing and securely fixes it without slipping.
The unique hook connection that penetrates the lower arm inside the head also prevents the rattling of the head due to overuse. Ex. Sharp custom-made narrow vent hook adopted.

The custom blade boasting an amazing quick response will instantly stand up without interruption during curve fall, free fall, and retrieve transition, and will continue to appeal its presence to the bus.
The B-custom that can induce a bite in any condition has excellent performance that can support lift & fall and hang-off techniques at a high level.

The position setting of the front blades on the double and tandem models is done with a fixed bead for a secure setup.
By eliminating the pipes and spacers that also hinder vibration, a sharper vibration is sought, and a stable flight attitude reduces line entanglement and increases flight distance.
In addition, the large hollow beads provided free not only reduce the weed entanglement around the bearing, but also emit a fine vibration sound.

■ 1/2oz TIN HEAD

The water flow that is received by the head is the same, and the 1/2 oz head, which is a remake of the 5/8 oz head with low specific gravity tin material, produces a wider vibration.
The vertical movement action of the head, which is lightweight and still receives the same flow resistance as 5/8 oz, sets it apart from conventional models. Crystal red eyes are attached to all 1/2 oz model colors.

■ BLADE SETTING

The double-willow and tandem-willow only lineup that can be used in any situation is the setting of front blade #3.5 and rear blade #4 that seeks the best balance of flight distance, vibration and flushing.
It will fly well and appeal firmly.

■ LONG ARM FORM

The arm form for resonating the 1/2 oz head lightened by the low specific gravity material widely from low speed to high speed retrieve, the upper arm and the lower arm have a long-length dedicated design.
It effectively transmits the vibration of the blade to the head even at any retrieve speed, and brings more complex wide action.
Gold beads specifications that can be easily identified as 5/8 oz.