EVERGREEN SUPERIOR | SPRS-76MH-S SUPER D ATTACKER

Powerful and super delicate “D” capture.

„Super D Attacker,“ a medium heavy model for capturing good models lurking in deep and long distances using medium to heavyweight rigs such as split shot rigs, carolina rigs, and float rigs .

A rig of up to 18g, with super-sensitive sensing performance that conveys a slight change in weight added to the rig or line clearly by combining a stiff main blank with a delicate high elastic short solid tip Full cast, operate the rig in the tidal and wave wind resistance as desired, instantly hook up the bite, and have the power to smoothly finish the hit good type.

Details and features

• 

  ■ Blank

  Equipped with a high-elasticity short solid tip with a tip diameter of 0.8 mm that produces delicate sensitivity comparable to a lightweight rig specialized model.

  Berry is composed mainly of 30 ton carbon, has a delicate solid tip and an optimal tension that smoothly connects the bat from the strong center, and the center to bat is wound with a 40 ton carbon with a higher elastic modulus a little thicker, By boldly increasing the diameter of the bat, we have the tension and toughness necessary for deep range and long distance zone capture.

  And the grip end ~ bat is reinforced with the lightest 4-axis fabric and Super Light Quattro cloth. Minimize weight increase, increase rigidity and pursue further lift potential.

  In order to make the most of the sensitivity of the blanks, the decorative winding of the winding check part has been eliminated, and all parts except the bat logo part have no paint and sand finish.

• 

  ■ Guide system

  Compared to SiC ring guides of the same size, the inner diameter is wider due to the thinness of the ring, and the titanium frame torzite ring guide, which has improved line sliding due to the characteristics of the ring surface, positively adopts the flying distance, so that the flying distance is all One class guide size down than before without sacrificing.

  Titanium frame SiC ring LF guide (T-LFSG-3) for the top guide where the line is easy to make an angle and the line cross section is gentle so that the line does not have a sharp angle, and the torzite ring KT guide for the tip to the belly ( T-KTTG 3, 3, 3, 3, 3.5, 4.5), KL guide (T-KLTG7L) to reduce the height difference between the KT guide and the original guide, and torzite ring AT guide (T-KLTG ATTG16) is used.

  Furthermore, the amount of winding and coating of each guide thread has been minimized, and the top guide has only a process to remove the step without winding the thread.

• 

  ■ Joint

  Focusing on smooth bend curves and light weight, a put-over joint set to the minimum necessary length is adopted.

• 

  ■ Grip design

  Super lightweight fore grip with quattro cloth carbon sleeve only.

• 

  Fuji IPS reel seat + ultra-compact EVA center grip with excellent sensitivity transmission due to the size of the contact surface to the sensitive base of the palm.

  The EVA end grips are designed to be minimal and lightest, leaving only the necessary starting points for casting to eliminate rig operation during heavy rig operations. A discerning setting that optimizes the EVA size according to the application at both the center and the end.

• 

  The grip end is equipped with an ultra-lightweight superior original end plate.

• ■ Grip length

  

• ■ Internal structure of grip

  By adopting the joint structure in the grip, rigidity is increased to minimize weight increase and further lift potential is pursued.

• 

  ■ Made in Japan

  This product is made in Japan. Please see here (Grand Cobra Product Development Concept) for

  „Made in Japan“ .